Supply of the normal heat flux first wall panels for the ITER blanket system. The supply involves qualification, manufacturing, factory testing, delivery and witnessing of the final acceptance testing of the panels at the ITER site.

Extended TitleSeries Production of the Normal Heat Flux (NHF) ITER Blanket First Wall (FW) Panels
Extended Description

The scope of the contract will be split into separate tasks:

The baseline scope of the contract will be:

— Task 1: Implementation of the required industrial production means;

— Task 2: Qualification of production means and processes through the fabrication of a small pre-series of First Wall (FW) panels;

— Task 3: Fabrication of an initial batch of FW panels.

The remaining panels in the series of 215 are not part of the baseline scope of the contract. They will be divided into batches of panels and will be awarded following re-openings of competition between contractors that have performed Task 1, 2 and 3.

— tenderers will be required to provide ‘Target Prices’ and ‘Ceiling Prices’ for Task 1, Task 2 and Task 3,

— tenderers will be required to provide ‘Maximum Target Prices’ and ‘Maximum Ceiling Prices’ for the remaining batches of panels that will be awarded following re-openings of competition.

Deadline Date2019-11-04
Publication Date2019-10-09
CountrySpain
Procurement StatusActive
TypeCompetitive procedure with negotiation
Contract TypeSupplies
Award CriteriaThe most economic tender
OrganisationThe European Joint Undertaking for ITER and the Development of Fusion Energy (‘Fusion for Energy’)
Attention OfPaul Marshall
AddressJosep Pla nr. 2 Torres Diagonal Litoral Building B3 Contact: F4E Procurement Attn: Paul Marshall
TownBarcelona
Postal Code08019
Phone+34 934897456
Class Code42152200
Class DescriptionParts of nuclear-reactor vessels
SourceOffice for Official Publications of the European Communities - Tenders electronic daily (Ted)

Version of 2019-08-14

Series Production of the NHF ITER Blanket First Wall Panels

The ITER Blanket/First Wall (FW) system is the innermost part of the ITER reactor directly exposed to the plasma. Its basic function is to provide the main thermal and nuclear shielding to the vacuum vessel and external reactor components. Its concept is a modular configuration mechanically attached to the vacuum vessel. The Blanket modules consist of stainless steel shield blocks on which separable FW panels are mechanically attached. The FW panels (the subject of this procedure) have typical dimensions of 1 m x 1.5 m, weigh about 1 ton and consist of a bi-metallic support structure bonded to backing plate with Beryllium tiles that directly face the plasma. Each FW panel is cooled by pressurised water with a 70 oC inlet and a 110 ºC outlet temperature. Europe will deliver 215 FW panels, which correspond to approximately half of the total FW panels for ITER.

Extended TitleSeries Production of the NHF ITER Blanket First Wall Panels
Extended Description

The scope of the contract will be split into separate tasks:

The baseline scope of the contract will be:

— Task 1: implementation of the required industrial production means,

— Task 2: qualification of production means and processes through the fabrication of a small pre-series of FW panels,

— Task 3: fabrication of an initial batch of FW panels.

The remaining panels in the series of 215 are not part of the baseline scope of the contract. They will be divided into batches of panels and will be awarded following re-openings of competition between contractors that have performed Task 1, 2 and 3.

— tenderers will be required to provide ‘Target Prices’ and ‘Ceiling Prices’ for Task 1, Task 2 and Task 3,

— tenderers will be required to provide ‘Maximum Target Prices’ and ‘Maximum Ceiling Prices’ for the remaining batches of panels that will be awarded following re-openings of competition.

Publication Date2019-08-14
CountrySpain
Procurement StatusFuture
TypeNot applicable
Contract TypeSupplies
Award CriteriaNot applicable
OrganisationThe European Joint Undertaking for ITER and the Development of Fusion Energy (‘Fusion for Energy’)
Attention OfPaul Marshall
AddressJosep Pla nr. 2 Torres Diagonal Litoral Building B3 Contact: F4E Procurement Attn: Paul Marshall
TownBarcelona
Postal Code08019
Phone+34 934897456
Class Code42152200
Class DescriptionParts of nuclear-reactor vessels
SourceOffice for Official Publications of the European Communities - Tenders electronic daily (Ted)

Related Procurements

Deadline: Mar 13, 2020
Delivery of a qualitative follow-up study of ESENER-3 including the factors that are associated with an effective management of psychosocial risks with a specific focus on the approach(es) taken by...
View more
Deadline: Jan 20, 2020
Obra de remodelación de la estación de Atotxa (Donostia) de la NRFPV.
View more
Material de extracción de sangre al vacío.
View more