Because of an error in public posting for amendment 0001, references to amendment 0001 are null.  Amendment 0003 is the current amendment which repeats amendment 0002 and addresses the error in publich posting.

The closing date for amendment 0003 is 12/14/18. 

Previous notice for amendment 0001 is listed below:


This is a notice of amendment to solicitation SPE7M2-18-R-0031.  The quantity has been increased to 94 pieces.  The opening date for the amendment is 10/11/18, the closing date for the amendment is 11/12/18.  This procurement is being reopened.

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved sources are: 

DRS Power and Control Technologies (27192) P/N: 10-7758-2 

The anticipated packaging requirements are as follows:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP: 001  PRES MTHD: 41  CLNG/DRY: 1  PRESV MAT: 00
WRAP MAT: CA  CUSH/DUNN MAT: 00  CUSH/DUNN THKNESS: 0
UNIT CONT: D3  OPI: M
INTRMDTE CONT: E5  INTRMDTE CONT QTY: AAA
PACK CODE: U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH

(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.1 of the standard.

(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, or the Solid State Technology Association

(JEDEC), http://www.jedec.org. 

Material is anticipated to be shipped to:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2001 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US

For transportation assistance see DLAD 52.247-9034.  For First Destination Transportation (FDT) awards see DLAD 52.247-9059 and contract instructions instead.

The solicitation is anticipated to require FOB Origin and Inspection and Acceptance of the supplies and packaging at Destination.

Quantity:  42

Various Increments Solicited:

FROM:  26    TO:  33

FROM:  34    TO:  41

FROM:  43    TO:  50

Unit of Issue:  EA

Destination Information:  FOB Origin

Delivery Schedule:  350 days ARO

Type of Set-Aside:  Unrestricted

The solicitation will be available in FEDBIZOPPS on its issue date of March 5, 2018. 

This is a sole source item, per FAR 6.302-1.  However, responsible sources may submit their capability statement, proposal, or quotation, which shall be considered.

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services.  However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation.  During the course of the on-line auction, offerors' proposed prices will be publicly disclosed to other offerors and anyone else having access to the on-line auction.  This public disclosure is anonymous, meaning that each offeror's identity will be concealed from other offerors (although it will be known to the Government), and only generic identifiers will be used publicly for each offeror's proposed pricing (e.g., "Offeror A").  By submitting a proposal in response to the solicitation, offerors agree to participate in the Reverse Auction and that their prices may be publicly disclosed, including to other offerors, during the Reverse Auction.  An offeror's final auction price will be considered its final proposal revision.

No price revisions will be accepted after the close of the Reverse Auction, unless the Contracting Officer decides that further discussions are needed and final proposal revisions are again requested in accordance with FAR 15.307.  All offers shall be in the English language and in U.S. dollars.

Deadline Date2018-12-14
Publication Date2018-11-14
CountryUnited States of America
Procurement StatusAmended
OrganisationDefense Logistics Agency
Attention OfElizabeth Beechey , Acquisition Specialist, Phone 6146927996, Email Elizabeth.Beechey@dla.mil
AddressP O Box 3990 Columbus OH 43216-5000
Class Code59: Electrical and electronic equipment components
Class DescriptionElectrical and electronic equipment components
SourceFederal Business Opportunities (FBO)

Version of 2018-09-26

Relay, Hybrid

This is a notice of amendment to solicitation SPE7M2-18-R-0031.  The quantity has been increased to 94 pieces.  The opening date for the amendment is 10/11/18, the closing date for the amendment is 11/12/18.  This procurement is being reopened.

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved sources are: 

DRS Power and Control Technologies (27192) P/N: 10-7758-2 

The anticipated packaging requirements are as follows:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP: 001  PRES MTHD: 41  CLNG/DRY: 1  PRESV MAT: 00
WRAP MAT: CA  CUSH/DUNN MAT: 00  CUSH/DUNN THKNESS: 0
UNIT CONT: D3  OPI: M
INTRMDTE CONT: E5  INTRMDTE CONT QTY: AAA
PACK CODE: U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH

(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.1 of the standard.

(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, or the Solid State Technology Association

(JEDEC), http://www.jedec.org. 

Material is anticipated to be shipped to:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2001 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US

For transportation assistance see DLAD 52.247-9034.  For First Destination Transportation (FDT) awards see DLAD 52.247-9059 and contract instructions instead.

The solicitation is anticipated to require FOB Origin and Inspection and Acceptance of the supplies and packaging at Destination.

Quantity:  42

Various Increments Solicited:

FROM:  26    TO:  33

FROM:  34    TO:  41

FROM:  43    TO:  50

Unit of Issue:  EA

Destination Information:  FOB Origin

Delivery Schedule:  350 days ARO

Type of Set-Aside:  Unrestricted

The solicitation will be available in FEDBIZOPPS on its issue date of March 5, 2018. 

This is a sole source item, per FAR 6.302-1.  However, responsible sources may submit their capability statement, proposal, or quotation, which shall be considered.

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services.  However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation.  During the course of the on-line auction, offerors' proposed prices will be publicly disclosed to other offerors and anyone else having access to the on-line auction.  This public disclosure is anonymous, meaning that each offeror's identity will be concealed from other offerors (although it will be known to the Government), and only generic identifiers will be used publicly for each offeror's proposed pricing (e.g., "Offeror A").  By submitting a proposal in response to the solicitation, offerors agree to participate in the Reverse Auction and that their prices may be publicly disclosed, including to other offerors, during the Reverse Auction.  An offeror's final auction price will be considered its final proposal revision.

No price revisions will be accepted after the close of the Reverse Auction, unless the Contracting Officer decides that further discussions are needed and final proposal revisions are again requested in accordance with FAR 15.307.  All offers shall be in the English language and in U.S. dollars.

Deadline Date2018-11-12
Publication Date2018-09-26
CountryUnited States of America
Procurement StatusAmended
OrganisationDefense Logistics Agency
Attention OfElizabeth Beechey , Acquisition Specialist, Phone 6146927996, Email Elizabeth.Beechey@dla.mil
AddressP O Box 3990 Columbus OH 43216-5000
Class Code59: Electrical and electronic equipment components
Class DescriptionElectrical and electronic equipment components
SourceFederal Business Opportunities (FBO)

Version of 2018-02-17

Relay, Hybrid

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved sources are: 

DRS Power and Control Technologies (27192) P/N: 10-7758-2 

The anticipated packaging requirements are as follows:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP: 001  PRES MTHD: 41  CLNG/DRY: 1  PRESV MAT: 00
WRAP MAT: CA  CUSH/DUNN MAT: 00  CUSH/DUNN THKNESS: 0
UNIT CONT: D3  OPI: M
INTRMDTE CONT: E5  INTRMDTE CONT QTY: AAA
PACK CODE: U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH

(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.1 of the standard.

(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, or the Solid State Technology Association

(JEDEC), http://www.jedec.org. 

Material is anticipated to be shipped to:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2001 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US

For transportation assistance see DLAD 52.247-9034.  For First Destination Transportation (FDT) awards see DLAD 52.247-9059 and contract instructions instead.

The solicitation is anticipated to require FOB Origin and Inspection and Acceptance of the supplies and packaging at Destination.

Quantity:  42

Various Increments Solicited:

FROM:  26    TO:  33

FROM:  34    TO:  41

FROM:  43    TO:  50

Unit of Issue:  EA

Destination Information:  FOB Origin

Delivery Schedule:  350 days ARO

Type of Set-Aside:  Unrestricted

The solicitation will be available in FEDBIZOPPS on its issue date of March 5, 2018. 

This is a sole source item, per FAR 6.302-1.  However, responsible sources may submit their capability statement, proposal, or quotation, which shall be considered.

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services.  However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation.  During the course of the on-line auction, offerors' proposed prices will be publicly disclosed to other offerors and anyone else having access to the on-line auction.  This public disclosure is anonymous, meaning that each offeror's identity will be concealed from other offerors (although it will be known to the Government), and only generic identifiers will be used publicly for each offeror's proposed pricing (e.g., "Offeror A").  By submitting a proposal in response to the solicitation, offerors agree to participate in the Reverse Auction and that their prices may be publicly disclosed, including to other offerors, during the Reverse Auction.  An offeror's final auction price will be considered its final proposal revision.

No price revisions will be accepted after the close of the Reverse Auction, unless the Contracting Officer decides that further discussions are needed and final proposal revisions are again requested in accordance with FAR 15.307.  All offers shall be in the English language and in U.S. dollars.

Deadline Date2018-04-04
Publication Date2018-02-17
CountryUnited States of America
OrganisationDefense Logistics Agency
Attention OfAlisha Blanton, Acquisition Specialist, Phone 6146925926, Email alisha.blanton@dla.mil
AddressP O Box 3990 Columbus OH 43218-3990
Class Code59: Electrical and electronic equipment components
Class DescriptionElectrical and electronic equipment components
SourceFederal Business Opportunities (FBO)

Version of 2018-02-17

SPE7M218R0031

Deadline DateNone Provided
Publication Date2018-02-17
CountryUnited States of America
OrganisationDefense Logistics Agency
SourceFederal Business Opportunities (FBO)

Version of 2018-02-17

Relay, Hybrid

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved sources are: 

DRS Power and Control Technologies (27192) P/N: 10-7758-2 

The anticipated packaging requirements are as follows:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP: 001  PRES MTHD: 41  CLNG/DRY: 1  PRESV MAT: 00
WRAP MAT: CA  CUSH/DUNN MAT: 00  CUSH/DUNN THKNESS: 0
UNIT CONT: D3  OPI: M
INTRMDTE CONT: E5  INTRMDTE CONT QTY: AAA
PACK CODE: U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH

(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.1 of the standard.

(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, or the Solid State Technology Association

(JEDEC), http://www.jedec.org. 

Material is anticipated to be shipped to:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2001 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US

For transportation assistance see DLAD 52.247-9034.  For First Destination Transportation (FDT) awards see DLAD 52.247-9059 and contract instructions instead.

The solicitation is anticipated to require FOB Origin and Inspection and Acceptance of the supplies and packaging at Destination.

Quantity:  42

Various Increments Solicited:

FROM:  26    TO:  33

FROM:  34    TO:  41

FROM:  43    TO:  50

Unit of Issue:  EA

Destination Information:  FOB Origin

Delivery Schedule:  350 days ARO

Type of Set-Aside:  Unrestricted

The solicitation will be available in FEDBIZOPPS on its issue date of March 5, 2018. 

This is a sole source item, per FAR 6.302-1.  However, responsible sources may submit their capability statement, proposal, or quotation, which shall be considered.

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services.  However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation.  During the course of the on-line auction, offerors' proposed prices will be publicly disclosed to other offerors and anyone else having access to the on-line auction.  This public disclosure is anonymous, meaning that each offeror's identity will be concealed from other offerors (although it will be known to the Government), and only generic identifiers will be used publicly for each offeror's proposed pricing (e.g., "Offeror A").  By submitting a proposal in response to the solicitation, offerors agree to participate in the Reverse Auction and that their prices may be publicly disclosed, including to other offerors, during the Reverse Auction.  An offeror's final auction price will be considered its final proposal revision.

No price revisions will be accepted after the close of the Reverse Auction, unless the Contracting Officer decides that further discussions are needed and final proposal revisions are again requested in accordance with FAR 15.307.  All offers shall be in the English language and in U.S. dollars.

Publication Date2018-02-17
CountryUnited States of America
Procurement StatusFuture
OrganisationDefense Logistics Agency
Attention OfAlisha Blanton, Acquisition Specialist, Phone 6146925926, Email alisha.blanton@dla.mil
AddressP O Box 3990 Columbus OH 43218-3990
Class Code59: Electrical and electronic equipment components
Class DescriptionElectrical and electronic equipment components
SourceFederal Business Opportunities (FBO)

Version of 2018-01-14

Relay, Hybrid

This is a Sources Sought Notice and is for information purposes only.  THIS IS NOT A REQUEST FOR PROPOSALS, QUOTATIONS, OR BIDS.  All of the following information is approximate and may be altered in the actual solicitation.  Responses to this sources sought announcement will be used by the Government to make appropriate acquisition decisions.  DLA Land and Maritime anticipates issuing a solicitation in the near future for approximately 42 EA of NSN 5945-01-666-0929 

Item will be purchased IAW the following:
DRS Power and Control Technologies (27192) P/N: 10-7758-2

The anticipated packaging requirements are as follows:
PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP: 001  PRES MTHD: 41  CLNG/DRY: 1  PRESV MAT: 00
WRAP MAT: CA  CUSH/DUNN MAT: 00  CUSH/DUNN THKNESS: 0
UNIT CONT: D3  OPI: M
INTRMDTE CONT: E5  INTRMDTE CONT QTY: AAA
PACK CODE: U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE: ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH

(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.1 of the standard.

(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org.

Material is anticipated to be shipped to:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2001 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US

For transportation assistance see DLAD 52.247-9034.  For First Destination Transportation (FDT) awards see DLAD 52.247-9059 and contract instructions instead.

The solicitation is anticipated to require FOB Origin and Inspection and Acceptance of the supplies and packaging at Destination. 

Whether or not this acquisition will be set aside for small businesses is yet to be determined.  All interested parties are invited to express your interest in this procurement by completing the attached Market Survey and returning to the buyer, Alisha Blanton, alisha.blanton@dla.mil, 614-692-5926 on or before January 24, 2018.

 

                                                      

Publication Date2018-01-14
CountryUnited States of America
Procurement StatusFuture
OrganisationDefense Logistics Agency
Attention OfAlisha Blanton, Acquisition Specialist, Phone 6146925926, Email alisha.blanton@dla.mil
AddressP O Box 3990 Columbus OH 43218-3990
Class Code59: Electrical and electronic equipment components
Class DescriptionElectrical and electronic equipment components
SourceFederal Business Opportunities (FBO)

Related Procurements

Deadline: Jan 9, 2019
36C24719R0033 Page 1 of 6 This request and procurement is 100% restricted to Service-Disabled, Veteran-Owned Small Businesses (SDVOSB) THIS IS NOT A REQUEST FOR PROPOSAL. THIS IS A REQUEST FOR SF...
View more
Deadline: Jan 7, 2019
This is a request for White Papers only.  Please click on the 'Sources Sought Notice' link below for full details on how to submit a White Paper under this...
View more
Deadline: Jan 9, 2019
Proposed procurement for NSN 6150013243807 TWIST CAP ASSEMBLY: Line 0001 Qty UI EA Deliver To: DLA DISTRIBUTION WARNER ROBINS By: 0142 DAYS ADOApproved...
View more