Complete Teardown of Broadcom's AFEM-8072 with a Physical Comparison with the Single and the Dual Module for the Mid and High Band LTE FEM in the Apple iPhone X Model A1901

Complete Teardown of Broadcom's AFEM-8072 with a Physical Comparison with the Single and the Dual Module for the Mid and High Band LTE FEM in the Apple iPhone X Model A1901

DUBLIN, March 12, 2018 /PRNewswire/ --

The "Broadcom AFEM-8072 - Mid and High Band LTE RF Front-End Module (FEM) Complete Teardown Report" report has been added to ResearchAndMarkets.com's offering.

http://mma.prnewswire.com/media/539438/Research_and_Markets_Logo.jpg

This report analyzes the full FEM SiP, including the RF IC and its IPDs, the filtering dies and the internal and external EMI shielding. It also features a cost analysis and a price estimation of the component. Finally, it also includes a physical comparison with the single and the dual module for the mid and high band LTE FEM in the Apple iPhone X model A1901.

Apple is ahead of its competitors in many applications, most obviously imaging and display - and is now also adopting innovative technology in the radio-frequency (RF) area. Having usually depended on well-proven solutions, the company is now using the latest and most advanced filter and packaging technology from Broadcom, formerly Avago Technologies, in two of the three versions of the iPhone X.

The versions dedicated to the Japanese and SIM-free markets feature a two-in-one Long Term Evolution (LTE) Front-End Module (FEM), covering the mid- and high-frequency RF bands. This FEM is the first to include advanced Electro-Magnetic Interference (EMI) shielding, allowing frequency band sharing in the same System-in-Package (SiP).

Located on the main Printed Circuit Board (PCB) substrate underneath the SIM card slot, the RF Front-End (RFFE) has different configurations depending on the transceiver chipset. The AFEM-8072 from Broadcom was found in the Japanese and SIM-Free versions of the Apple iPhone X, the A1865 and A1902 respectively. In the European version, two separate modules from Avago share the RFFE area with Qorvo, Skyworks, and TDK-Epcos.

The AFEM-8072 is a mid- and high-band LTE FEM. As usual, it features several dies, including power amplifier, silicon-on-insulator switch and filters. The last ones still use Avago's Microcap bonded-wafer Chip Scale Packaging (CSP) technology with Through-Silicon Vias (TSVs) enabling electrical contacts and scandium-doped aluminum nitride (AlScN) as a piezoelectric. However, for this special version, Broadcom has integrated two advanced features: An RF integrated circuit (IC) featuring several integrated passive devices (IPDs) for antenna matching; and an EMI shield inside the FEM to reduce interference between the dies. Moreover, Broadcom has chosen Sony to supply low power SOI switches.

Thanks to all these innovations, Broadcom is able to supply a cost effective two-in-one component with fewer interconnections.

Key Topics Covered:

1. Overview / Introduction

2. Broadcom Company Profile

3. Apple iPhone X - Teardown

4. Market Analysis

5. Physical Analysis
Physical Analysis Methodology
Package
View and dimensions
Package opening: Power amplifier, switch, RF IC, filters
Package cross-section: Overview, dimensions, substrate, internal and external shielding
Package Physical Data Summary
Power Amplifier, Switch Die
View, dimensions, and markings
Die overview and cross-section
Matching RFIC Die
View, dimensions, and markings
Die overview and delayering
Die process and cross-section
Filter Dies
View, dimensions, opening and markings
Die overview: Cap, substrate, cells
Die cross-section: Sealing frame, anchor, TSV, holes, FBAR structure
Filter Physical Data Summary

6. Physical Comparison: Broadcom Separate Solution
Package View and Dimensions
Filter Dies

7. Manufacturing Process Flow
Dies Process
Filter Wafer Fabrication Unit
Filter Process Flow
Packaging Process Flow

8. Cost Analysis
Cost Analysis Overview
Main Steps Used in the Economic Analysis
Yield Hypotheses
Filter Die Cost
Front-end (FE) cost
Filter wafer front-end cost per process step
Wafer and die cost
Matching RFIC Die Cost
Front-end (FE) cost
Wafer and die cost
Packaging Cost
Module Cost

9. Estimated Price Analysis

Companies Mentioned

    --  Apple
    --  Broadcom

For more information about this report visit https://www.researchandmarkets.com/research/w2bthd/complete_teardown?w=5

Media Contact:

Research and Markets
Laura Wood, Senior Manager
press@researchandmarkets.com

For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900

U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716

View original content:http://www.prnewswire.com/news-releases/complete-teardown-of-broadcoms-afem-8072-with-a-physical-comparison-with-the-single-and-the-dual-module-for-the-mid-and-high-band-lte-fem-in-the-apple-iphone-x-model-a1901-300612185.html

SOURCE Research and Markets