Ainstein T-79: Automotive 79GHz Short Range Radar Complete Teardown Report with a Comparison of Delphi's 76/77GHz Blind Spot Radar

DUBLIN, Nov. 6, 2018 /PRNewswire/ --

The "Ainstein T-79: Automotive 79GHz Short Range Radar Complete Teardown Report" report has been added to's offering.

The Ainstein T-79 is designed for Advanced Driver Assistance Systems (ADAS) applications, like warning or assisted braking functions, blind spot monitoring, lane change assist and rear crossing traffic alerts.

It is based on 79GHz technology and contains six planar antennas, four for reception and two for transmission. The sensor has a field of view of 45 in azimuth and a maximum range of 55m.

Resulting from a collaboration with Texas Instruments (TI), the system integrates only one electronic board, equipped with a TI CMOS single-chip millimeter wave (mmWave) sensor. This monolithic microwave integrated circuit (MMIC) features six channels, again that's four receivers and two transmitters, along with a microcontroller unit (MCU) and a digital signal processor (DSP) all on the same chip. The enables ultra-low unit cost and power consumption of 4.2W.

The electronic board is manufactured with an asymmetric structure using a hybrid PTFE/FR4 substrate, and is equipped with planar antennas.

With this new short-range radar generation, Ainstein has significantly decreased the volume and manufacturing cost of the sensor compared to competitor solutions. The report contains a comparison with Delphi's 76/77GHz Blind Spot Radar.

Based on a complete teardown analysis of the Ainstein radar, this report provides the bill-of-material (BOM) and the manufacturing cost of the radar sensor.

Key Topics Covered:

1. Overview/Introduction

    --  Executive Summary
    --  Company Profile
    --  Reverse Costing Methodology

2. Physical Analysis

    --  Global View of the Radar
    --  Views and Dimensions of the Radar
    --  Radar Opening
    --  Electronic Board
    --  Global View
    --  High Definition Photo
    --  Component Markings and Identification
    --  Block Diagram
    --  RF Chipset

3. Cost Analysis

    --  Board Cross Section and EDX Analysis
    --  PCB Cost
    --  BOM Cost - Electronic Board
    --  BOM Cost - Housing
    --  Material Cost Breakdown
    --  Accessing the Added Value (AV) cost
    --  Electronic Board Manufacturing Flow
    --  Details of the Housing Assembly
    --  Added Value Cost Breakdown
    --  Manufacturing Cost Breakdown
    --  Comparison with Delphi BSD Radar

4. Estimated Price Analysis

    --  Estimation of the Selling Price

For more information about this report visit

Did you know that we also offer Custom Research? Visit our Custom Research page to learn more and schedule a meeting with our Custom Research Manager.

Media Contact:

Laura Wood, Senior Manager

For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900

U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716

View original content:

SOURCE Research and Markets