May 16, 2019   SOURCE: BusinessWire

Global $10.2 Billion Pre-Insulated Pipes Market by Installation, End-use Industry and Region - Forecast to 2024 - ResearchAndMarkets.com

The "Pre-Insulated Pipes Market by Installation (Below Ground & Above Ground), End-use Industry (District Heating & Cooling, Oil & Gas, Infrastructure & Utility), and Region (Europe, North America, APAC, MEA, South America) - Global Forecast to 2024" report has been added to ResearchAndMarkets.com's offering.

Globally, the pre-insulated pipes market is estimated to be valued at USD 6,398.9 million in 2019 and is projected to reach USD 10,214.4 million by 2024, at a CAGR of 9.8% between 2019 and 2024.

Pre-insulated pipes are replacing traditionally insulated pipes in almost all applications due to their increased advantages, such as high efficiency, enhanced insulation, and better physical performance. Pre-insulated pipes are energy efficient as compared with traditionally insulated pipes and prevent heat losses by 40% over traditionally insulated pipes, which directly reflects in cost savings. These factors have resulted in the increasing adoption of pre-insulated pipes in various end-use industries to prevent heat loss and conserve energy.

Major companies in the pre-insulated pipes market include Georg Fischer AG (Switzerland), Logstor (Denmark), Uponor (Finland), Watts Water Technologies (US), Perma-Pipe International Holdings (US), Kabelwerke Brugg (Switzerland), Polypipe Group PLC (UK), and Isoplus Fernwaermetechnik GmbH (Germany), among various others.

The below-ground segment of pre-insulated pipes market is projected to grow at the higher CAGR during the forecast period

Based on the installation, the below-ground segment is projected to grow at the higher CAGR between 2019 and 2024. Below ground systems are also known as buried/ underground installations which are the most widely used globally.

Long straight below ground installations are preferred as they reduce the requirement for fittings, joints, and welding. Below ground systems are however high on labor and installation costs, since these require digging, both, during installation and maintenance.

Among end-use industries, the district heating & cooling segment is projected to be the largest segment of the pre-insulated pipes market

This segment is estimated to account for the largest share of the global pre-insulated pipes market in terms of value in 2019 and is projected to grow at the highest CAGR during the forecast period.

Some of the key advantages provided by pre-insulated pipes are excellent thermal efficiency, lower maintenance, reduced on-site labor, and improved safety, as these are better protected against leakages, and offer superior quality insulation, which minimizes energy loss.

The market in Europe is projected to grow at the highest CAGR in the global pre-insulated pipes market

The pre-insulated pipes market in the European region is projected to grow at the highest CAGR during the forecast period. The demand for housing in Germany is anticipated to grow due to the increasing influx of immigrants from the Middle East.

This has led to increased construction activities, especially the construction of housing and commercial establishments, thus creating growth opportunities for the pre-insulated pipes market in the infrastructure & utility segment.

Due to the implementation of new regulations, such as NZEB for new buildings and amendments in the Energy Saving Act, there is increasing adoption of pre-insulated pipes, which is driving the market.

Key Topics Covered

1 Introduction

2 Research Methodology

3 Executive Summary

4 Premium Insights

4.1 Attractive Opportunities in the Pre-Insulated Pipes Market

4.2 Pre-Insulated Pipes Market, By Installation

4.3 Pre-Insulated Pipes Market, By End-Use Industry

4.4 Pre-Insulated Pipes Market, By Region

5 Regulations Governing Pre-Insulated Pipes

5.1 Introduction

5.2 International Codes and Standards for District Heating Systems

5.3 International Codes and Standards Related to Equipment, Material and Construction

5.4 Additional Standards for Pipeline Systems

5.5 Codes and Standards Requirements for Carrier Pipes

5.6 Standard Materials for Hot and Cold Insulation

6 Pre-Insulated Pipes Market, Comparative Study

6.1 Introduction

6.2 Component Cost

6.3 Labor Cost

6.4 Execution Cost

6.5 External Support

7 Market Overview

7.1 Introduction

7.2 Market Dynamics

7.2.1 Drivers

7.2.1.1 Growth in District Heating & Cooling End-Use Industry Segment

7.2.1.2 Rising Awareness Regarding Environment and Government Incentives

7.2.1.3 Penetration of Pre-Insulated Pipes in Niche Applications

7.2.2 Restraints

7.2.2.1 Volatility in Prices of Raw Materials

7.2.2.2 High Cost of Pre-Insulated Pipes

7.2.3 Opportunities

7.2.3.1 Investments in Emerging Economies

7.2.3.2 Controlling the Cost of Labor

7.2.4 Challenges

7.2.4.1 Stringent Regulatory Compliances

7.2.4.2 Logistics and Certification

7.3 Porter’s Five Forces Analysis

7.4 Economic Indicators

8 Pre-Insulated Pipes Market, By Type of Pipe

8.1 Introduction

8.2 Flexible Pre-Insulated Pipes

8.3 Rigid Pre-Insulated Pipes

9 Pre-Insulated Pipes Market, By Layer

9.1 Introduction

9.2 Carrier Pipes

9.3 Foaming/Insulation Layers

9.4 Jacketing

10 Pre-Insulated Pipes Market, By Materials Used

10.1 Introduction

10.2 Metals & Alloys

10.3 Others

11 Pre-Insulated Pipes Market, By Medium

11.1 Introduction

11.2 Steam

11.3 Water

11.4 Others

12 Pre-Insulated Pipes Market, By Installation

12.1 Introduction

12.2 Below Ground Pre-Insulated Pipes

12.3 Above Ground Pre-Insulated Pipes

13 Pre-Insulated Pipes Market, By End-Use Industry

13.1 Introduction

13.2 District Heating & Cooling

13.3 Oil & Gas

13.4 Infrastructure & Utility

13.5 Others

14 Regional Analysis

14.1 Introduction

14.2 Asia Pacific

14.3 Europe

14.4 North America

14.5 Middle East & Africa

14.6 South America

15 Competitive Landscape

15.1 Overview

15.2 Competitive Leadership Mapping, 2019

15.3 Competitive Benchmarking

15.4 Market Ranking of Key Players

15.5 Competitive Scenario

16 Company Profiles

16.1 Georg Fischer AG

16.2 Perma-Pipe International Holdings Inc.

16.3 Watts Water Technologies Inc.

16.4 Uponor Oyj

16.5 Polypipe Group PLC

16.6 Kabelwerke Brugg AG Holding

16.7 Interplast S.A.

16.8 Isoplus Fernwaermetechnik GmbH

16.9 Pem Korea Co. Ltd.

16.10 Thermaflex International

16.11 Zeco Aircon Ltd.

16.12 Logstor A/S

16.13 Aquatherm GmbH

16.14 Other Companies

16.14.1 Ke KELIT Kunststoffwerk Gesellschaft M.B.H.

16.14.2 KC Polymers Pvt. Ltd.

16.14.3 Thermal Pipe Systems Inc.

16.14.4 Ecoline S.R.L.

16.14.5 Vital Energi Utilities Ltd.

16.14.6 Set Pipes GmbH

16.14.7 Polytherm Heating Systems Ltd.

16.14.8 Maincor Rohrsysteme GmbH & Co. KG

16.14.9 Durotan Ltd.

16.14.10 Nupi Industrie Italiane S.p.A.

16.14.11 Muovitech International Group

16.14.12 Tece GmbH

16.14.13 Rovanco Piping Systems Inc.

16.14.14 Rehau Unlimited Polymer Solutions

16.14.15 Brunata Ltd.

16.14.16 Thermacor Process Inc.

16.14.17 Simona AG

16.14.18 Geberit AG

For more information about this report visit https://www.researchandmarkets.com/r/elz2z4